Air Conditioning Belconnen
Belconnen homes span everything from 1970s brick-veneer to modern townhouses around the lake. Older homes usually benefit most from ducted retrofit; newer builds are ideal for zoned ducted systems.
- ARCtick licensed
- 5-year workmanship warranty
- 4.9★ Google rating
- 10+ years across Canberra
What we know about Belconnen homes
- Common: retrofit ducted into 1970s–80s brick-veneer homes
- Split installs common for lakeside apartments
- Older gas ducted replacements are a big share of our winter work here
Air conditioning in Belconnen — what actually matters
Belconnen spans 1970s brick-veneer through to lakeside apartment towers, so a single template doesn't fit — a 1978 four-bedroom in Hawker needs a very different scope to a 2015 two-bed apartment at Emu Bank.
Belconnen's housing stock is broadly 1970s–early 90s, which means clean truss roof cavities, generous eaves for outdoor unit placement, and enough block area on most sites to sit a condenser well away from bedroom windows. That combination makes Belconnen one of the more predictable ducted retrofit suburbs — quotes rarely surprise us on site.
A big share of Belconnen homes still run their original gas ducted heating from the 1980s or 90s — typically Brivis, Vulcan or Bonaire. As those systems fail we replace them with reverse-cycle ducted, reusing the existing ductwork where a pressure-and-leak test passes. When it doesn't (about a third of jobs) we re-duct with insulated flexible duct rated for the new system's static pressure.
Near Lake Ginninderra we do a steady stream of switchboard upgrades ahead of ducted installs — a lot of the original 1970s–early 90s boards were built for single-phase 63A supply and don't have the spare capacity for a 14 kW ducted outdoor unit plus induction cooking plus EV charging. We coordinate the electrical upgrade in the same visit.
Typical pricing in Belconnen
Indicative supply-and-install ranges for standard Belconnen homes. Every quote is fixed after an onsite check.
| System | Range (installed) | Notes |
|---|---|---|
| Single split (2.5–3.5 kW) | $2,100–$2,800 | Bedroom or study add-on |
| Living-area split (5.0–7.1 kW) | $2,700–$3,700 | Standard back-to-back install |
| Multi-split (3 heads) | $6,200–$8,200 | Common for extension retrofits |
| 4-zone ducted (12–14 kW), single-storey | $12,000–$16,000 | Typical Belconnen 4-bed retrofit |
| Switchboard upgrade (add-on) | $1,800–$3,500 | Common on pre-1990 wiring |
Case example — Belconnen 4-bed brick veneer ducted retrofit
Original 1982 four-bedroom near Lake Ginninderra with a failed 30-year-old Brivis gas ducted system. Existing ductwork passed leak testing after minor resealing, so we reused it and fitted a Mitsubishi Electric 14 kW ducted unit with 4 zones and MyAir 5 controls. Switchboard was upgraded from an old ceramic-fuse board to a modern 100A three-phase unit in the same visit. Owners report holding 21°C set-point through a cold July week at roughly half the running cost of the old gas system. Two-day install.
Popular services in Belconnen
Recommended brands for Belconnen homes
FAQs — Belconnen
Get a free onsite quote in Belconnen
Free onsite quotes across Canberra. Same-week bookings for most jobs.